Hebel Floor Panels are steel-reinforced AAC panels that are 150mm to 250mm thick. The flooring system uses a ring anchor to create a flat, solid surface ready for just about any floor covering from carpet to direct fix tiles and timber. This building system is ideal in solid home construction for second storey flooring or ground floors on sloping sites. It eliminates the need for timber or steel floor framing or pouring of concrete.

Features

• Span up to 6 metres " no need for floor framing

• Exceptional acoustic insulation for second storey flooring " helps to create a quieter home

• Excellent thermal performance, particularly for exposed ground floors

• Not affected by weather during installation

Hebel PowerFloor is ideal for first floor and suspended ground floors as well as decks and balconies. PowerFloor panels are glued and screwed to timber or steel framing. It is this composite action that results in greater resistance to bounce and flex making Hebel PowerFloor an excellent stable base for tile, slate, marble and other hard surface flooring. It is also perfectly suited to carpet, vinyl, timber boards and decorative finishes.

• No propping: No requirement for rigid propping, as panels are supported by the joists.

• Good load carrying capacity: PowerFloor systems can support a maximum uniformly distributed load of 3kPa, or concentrated (point) load of 1.8kN, with joists at 600mm maximum centres. For loads outside this range, please contact Hebel.

• Low wastage: Minimal on-site cutting as panels are supplied in standard lengths to suit joist spacings.

• Tranquillity: PowerFloor is designed for superior acoustic insulation. It creates a sound barrier between floors, and used with a Hebel wall system, maximises the tranquillity in your home.

• Termite resistant: AAC is not a food source for termites.

• No pre-drilling required: All fixings can self-tap through the AAC.

• Fire resistance: Excellent resistance to fires on top of the floor.

• Solidity: PowerFloor is extremely strong, and each panel is reinforced with corrosion-protected steel mesh. The panels fit snugly together to form a strong and smooth floor.

• Thermal Resistance: PowerFloor's better thermal efficiency assists in achieving thermal ratings that results in reduced heating and cooling costs.